10% OFF Labor Day Code: Jorts





WeBoost Drive Reach OTR Cell Phone Signal Booster for Trucks 477154

Sku: 104492598960
MFG #: 477154


Available on backorder

  • 4G Coverage of Semi-Trucks for Multiple Devices
  • Works for all phones & all US carriers
  • 5G Ready – Will work for the next decade and beyond
  • Hard-mountable OTR antenna for semi-trucks and big rigs
Supported Carriers: AT&T, Verizon, T-Mobile

The WeBoost Drive Reach is WeBoost’s flagship signal booster for vehicles, including cars, SUVs, trucks, semi trucks, RVs, fleet vehicles, boats, yachts, and more. This 5G ready booster is very customizable, allowing for numerous setups including hardwiring and a myriad of antenna setups for your ride.

The Drive Reach boosts multiple devices at once, allowing everyone in your vehicle to enjoy crisp, clear cellular signal. It has incredible range, and will work on even the most rural of roads and highways. The 12” Antenna bundle allows for even more range, and the OTR antenna is designed for trucks, allowing you to hardmount the booster’s antenna to the frame.

Vehicle signal booster installation is simple:

  • Place the outdoor antenna on top of your car/mount it to your truck.
  • Place the amplifier under the driver’s seat.
  • Place the interior antenna near the driver’s seat – best location depends on model of booster.
  • Plug power supply into power supply.
  • Enjoy your booster!



FREQUENCY BAND 12, 13, and 17 – 700 Mhz;
BAND 5 – 850 Mhz; BAND 4 – 1700/2100 Mhz;
BAND 25/2 – 1900 Mhz
MAX GAIN 50 decibels (dB)
POWER 5V / 4.5A
DIMENSIONS 6 x 4.5 x 1.5 in / 15.24 x 11.43 x 3.81 cm
WEIGHT 1.8 lbs / 0.82 kg (amplifier only)
UPC 810005961608
FCC Notice This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by FCC or a licensed wireless service provider.

Installation Guide



Supported Carriers

The weBoost Drive Reach OTR Signal Booster Kit supports the voice, 3G, and 4G LTE networks from all major carriers in the United States and Canada. For other locations, please consult the frequencies listed below to see if this product will work for you.

Here is a more detailed breakdown of the carriers, networks and frequencies boosted by this kit:

  • AT&T 2G, 3G, 4G HSPA+ & 4G LTE
  • Verizon 2G, 3G, 4G LTE & XLTE
  • Sprint 2G, 3G & 4G LTE
  • T-Mobile 2G, 3G, 4G HSPA+ & 4G LTE
  • US Cellular 2G, 3G & 4G LTE
  • All other carriers using 700 MHz, 800 MHz, 1900 MHz, and AWS 1700/2100 MHz frequencies

Please Note: This signal booster kit will not work in most European, Asian, and African countries because the frequencies used there are different than those boosted by this equipment.

Included Items

  • weBoost Drive Reach Amplifier
  • DC Power Adapter
  • 4G OTR Trucker Antenna with 14′ Coax Cable and 3-Way Mount
  • Inside Low-Profile Antenna

Installation Overview

Installing the weBoost Drive Reach OTR Signal Booster kit is very easy and can usually be done in just a few minutes.

To start, assemble the 4G Trucker Antenna to the size and configuration that you prefer, and mount to the truck with one of the many different mounting options. Run the 14′ antenna cable into the cab, connect the SMB cable adapter, and then attach to the amplifier’s Outside Antenna port. To the inside connect the inside antenna cable that is attached to the slim low-profile inside antenna. Locate the inside antenna near where you’ll typically be using the phone, for example, in the center console or on the side of the driver’s seat. Ensure that the cables and amplifier won’t be damaged if the seats are adjusted. Keep inside antenna at least 8 inches from any person and approximately 18 inches from where you typically use your phone. Connect the DC power adapter to the amplifier and plug in to immediately start receiving boosted signal.

Bulk Purchase Inquiry

Contact us for bulk pricing

Log in to your SIMETRY Platform Dashboard
  • See Data Usage
  • Make a Payment
  • Open Sim Support Tickets
  • View Account Analytics
    …and More
Log in to your e-Commerce account
  • Update Account Details
  • View Purchase History
  • Change Shipping Address
    … and more